Product Description

Product Info

Unit SET
Minorder 1
Supplyability 15 Sets / Month
Payment T/T
Port 45 working days
Certification CE, ISO
Packaging International wooden case

Product Detail


High Acceleration Mechanical Shock Tester Shock Test System



Shock testing systems product description
The shock testing system are mainly applicable to shock resistance tests in such fields as electronic products, aerospace, shipping, military industry, automotive parts and transportation. Shock tests in form of half sine wave, final peak saw tooth wave or trapezoidal wave shock tests can be carried out by selecting different waveform generators.
The equipment meets the standards of GB/T2423-2008, GJB150, GJB360, GJB548, GJB1217, UN38.3, IEC62281,MIL-STD-202F, IEC-68-2-27,MIL-STD-810F, MIL-STD-883E, etc.


Shock testing systems parameters

Table Size 200*250mm
Max. Payload 10kg
Shock Pulse Half Sine Wave
Acceleration Range 20~2000g
Pulse Duration 0.2~18ms
Drop Height 1500mm
Compressed air 0.5 MPa
Power supply 220-240V, 60Hz, 1-phase


Shock testing systems features:

Lifting mechanism is a precision screw. It is driven by a precision motor, and guided by two
precision guide columns to ensure that the platform rise and fall smoothly. Precise shock data
accuracy is ensured.
Impact pre-accumulation acceleration mechanism, make the impact platform greater than +1G
acceleration free fall.
The shock base adopts the structural design of the airbag + shock absorber damper, which
does not affect the floor structure during impact.
The machine base is designed without resonance and the impact data is accurate
The use of gas-liquid pressure brake friction friction brake mechanism, no secondary impact
Equipped with pressure storage tank to ensure the stability of the brake mechanism and ensure
the integrity of the test data
Single-channel data measurement acquisition, acceleration data measurement, storage, report
printing, data callback, database management and other functions


Customer Services



  • Technical consultation: test method, laboratory planning and suggestion.
  • Equipment selection: selection scheme, FAQ.
  • Product testing scheme.



  • Customer communication and progress report.
  • Guidance for pre-installation preparation, equipment commissioning and test run.
  • Calibration (when Third Party’s verification is required).



  • Technical training: operation of equipment, daily maintenance, common fault diagnosis and troubleshooting.
  • Scheduled on-site service: Detection of problem as soon as possible in order to eliminate equipment and anthropogenic hazards. This is to ensure long term and stable equipment operation as well as delivery of latest technical information.
  • Technical support: special paid services are provided according to customer’s needs.

Products Categorys

Recommend Products