Product Description


Product Info

Unit SET
Minorder 1
Supplyability 15 Sets / Month
Payment T/T, L/C
Port 30-35 Work Days
Certification CE, ISO
Place CHINA
Packaging International standard wooden case

Product Detail

Name:Customizable Table Transportation Simulation Mechanical Vibration Test Shaker TableVibration Table (mm):1000 X 800
Vibration Direction:Up / DowmFrequency Range:5-60 Hz
Adjustable Displacement Range:0-2.6mmP-PAcceptable Acceleration Range:0-11G
Max.Loading Weight:300KGOperation Mode:Fixed /Random/Sweep
Power Source:AC 220V 50/60Hz


Customizable Table Transportation Simulation Mechanical Vibration Test Shaker Table

 

 

Mechanical vibration test system has three testing modes: fixed frequency test, Sweep frequency test and multi-stage frequency test. These three tests provide the users the determination for vibration functional test, vibration durability test, package transporting test, resonance search, resonance dwell, stress screen, fatigue test and so on.

 

i) Fixed frequency test mode: firstly set the fixed testing frequency, amplitude and testing duration. The software will control the vibrating table according to the set parameters until the testing time is finish. Operating mode is shown in figure a. The test frequency and amplitude must be within the machine’s performance curve, or it cannot be tested.

 

ii)Sweep frequency test mode: firstly set the starting frequency, stop frequency, testing amplitude and sweep frequency duration. The software will control the vibrating table according to the set parameters (gradually increase or reduce vibrating frequency from starting frequency to stop frequency). The sweep frequency speed is decided by its time. Operating mode is shown in figure b. The test frequency and amplitude must be within the machine’s performance curve, or it cannot be tested.

 

iii) Multi-stage frequency test mode: individually set multiple (at most ten stages) test frequency and testing duration (each stage with single frequency test). Then set certain amplitude. The software will control the vibrating table according to the set parameters. The operating mode is shown in figure c. Test frequency and amplitude must be within the machine’s performance curve, or it cannot be tested.

 

Vibration Tester Specification

 

Model
RV8000
Vibration Table (mm) Lx W1000 x 800
Frequency Range5-60 Hz
 Adjustable Amplitude (mmp-p)0-2.6
Acceleration Range0-11G
Max.Payload (kg)300
Control InterfaceIBM PC Serial port Rs232 9P/USB Port
Test Method
Fixed frequency,Sweep frequency(linear/logarithm),
multi-stage random
WaveformSine Wave
Vibration DirectionUp / Down
Power SupplyAC220V 50/60Hz

 

.


 

Customer Services

 

Presales:

  • Technical consultation: test method, laboratory planning and suggestion.
  • Equipment selection: selection scheme, FAQ.
  • Product testing scheme.

 

In-Sales:

  • Customer communication and progress report.
  • Guidance for pre-installation preparation, equipment commissioning and test run.
  • Calibration (when Third Party’s verification is required).

 

After-Sales:

  • Technical training: operation of equipment, daily maintenance, common fault diagnosis and troubleshooting.
  • Scheduled on-site service: Detection of problem as soon as possible in order to eliminate equipment and anthropogenic hazards. This is to ensure long term and stable equipment operation as well as delivery of latest technical information.
  • Technical support: special paid services are provided according to customer’s needs.


Mechanical shaker images






Products Categorys

Recommend Products

Navigation